RAID Calculator
RAID Comparisons
☾
RAID 6 vs RAID 10 — 4×12 TB
You have 4 drives of 12 TB (48 TB raw) and are deciding between RAID 6 (double parity — two drives may fail) and RAID 10 (striped mirrors — fast, one failure per mirror pair). The table shows what each choice actually gives you.
| Metric | RAID 6 | RAID 10 |
|---|---|---|
| Usable capacity | 24 TB | 24 TB |
| Redundancy overhead | 24 TB | 24 TB |
| Storage efficiency | 50% | 50% |
| Fault tolerance (drives) | 2 | 1+ |
| Minimum drives | 4 | 4 |
Both give the same usable capacity on this configuration — the decision is about failure behavior, not space.
RAID 6 survives more simultaneous drive failures — with 4 drives of 12 TB, rebuild windows are long, and that margin is what saves the array when a second drive acts up mid-rebuild.
With drives of 8 TB and larger, single-parity rebuilds carry measurable URE risk — check yours in the rebuild calculator.
See it live
Open this exact configuration in the calculator and tweak drives, sizes and levels freely.
More comparisons