Synology HAT5300 12 TB (HAT5300-12T)

NASProDatacenter

The Synology HAT5300 HAT5300-12T is a 12 TB NAS-class hard drive aimed at NAS, Pro, Datacenter. It spins at 7200 RPM with 256 MB of cache and carries a 5-year warranty. On this page you get the complete manufacturer specification, what the drive delivers inside common RAID levels, its measured or rated reliability, and where to buy it — all cross-checked against the datasheet.

Full specifications
Capacity12 TB
Rotational speed7200 RPM
Cache256 MB
InterfaceSATA 6Gb/s
MTBF2.5M h
URE rating1 / 1015
Power (idle / load)5.0 / 7.0 W
Noise (idle / seek)25 / 32 dB
Workload rating550 TB/yr
Warranty5 years
Use casesNASProDatacenter
Manufacturer datasheet →
In a RAID array
RAID 5 · 4×12TB
36 TB
RAID 6 · 4×12TB
24 TB

Four of these 12 TB drives in RAID 5 give you 36 TB usable and survive one failure; the same four in RAID 6 give 24 TB and survive two. With drives this size, a rebuild reads every surviving disk end to end — the larger the drive, the stronger the case for double parity. Model your own drive count and level in the calculator.

Open in the RAID calculator →
Reliability & failure rate

This model is not yet in the Backblaze Drive Stats public dataset, so no independent field failure rate is available. The manufacturer specifies an MTBF of 2.5M h and a 550 TB/yr workload rating — both signals that it is built for the sustained duty of a NAS rather than a desktop.

Where to buy — 12 TB NAS drives
Other 12 TB drives
FAQ

Is the Synology HAT5300 12 TB a good NAS drive?

Yes — it is a 7200 RPM NAS-class drive rated for 550 TB/yr of writes per year with a 5-year warranty, which puts it firmly in NAS-duty territory rather than desktop use. Suitability depends on your bay count and RAID level; use the RAID calculator to check usable capacity and rebuild risk for your setup.

How much usable space do I get from 12 TB drives in RAID 5?

With four 12 TB drives, RAID 5 yields 36 TB usable (capacity of three drives) and survives one failure; RAID 6 yields 24 TB and survives two. More drives raise both the usable total and the rebuild risk — the calculator computes the exact figures for any count.

What is the failure rate of the Synology HAT5300 12 TB?

This model is not yet in the public Backblaze Drive Stats dataset, so no independent field AFR exists. The manufacturer rates it at an MTBF of 2.5M h and 550 TB/yr annual workload — both NAS-grade figures.

← Back to the full drive database